3D FLOOR MATS - Holden RC Colorado Dual Cab 2008 - 2012
3D mats are available for most Cars, SUV, and 4WD’s for off and on road vehicles conditions.
Each mat is made to measure to ensure a perfect fit in your vehicle.
They have a UNIQUE NON-SLIP BACKING to suit carpet and vinyl.
The high raised lip around each mat catches sand, stones & mud
making cleaning of your vehicle so much easier! Just lift out, shake
and wipe clean and pop ’em back in!
GRID GD01 MATTE BLACK - 17 X 9
GRID GD01 GLOSS GRAPHITE - 17 X 9
GRID GD04 MATTE BLACK - 17 X 9
GRID GD04 Gloss Graphite - 17 X 9
GLADIATOR X COMP SERIES TIRE
Product Description


Tread and Sidewall Design:
• Aggressive is an understatement. This tire is a beast!
• Maximum traction and grip on the shoulder area of the tire when it’s needed the most.
• Self-cleaning tread and shoulder area, to prevent mud, rock and snow build up.
Tire Construction Advantages:
• The tire casing has three full plys of polyester with a high turn up on the side wall.
• This gives the tire excellent strength and durability.
• The tread area has two full steel belts and two full nylon belts.
• The result is a very stable tread and shoulder area for aggressive and proven performance.
• The end result is a tire that is strong, stable, durable and surprisingly quiet.
• M&S Rated
Adventure Rack
Here is a truly innovative rack that any real adventurer needs. Coined the Adventure rack, this modular rack will suit almost any camping enthusiast. Perfect for any ute or trailer.
This rack is adjustable width wise to suit almost any tub, From 1200mm up to 1580mm. Measured from inside lip of tub to inside lip
The rack is also adjustable up and down, from 310mm above the tub to 510mm
Price above is for base rack, select any options you desire to see the new price above.
This rack can quickly mount many different accessories. Perfect for that extra spare tyre or a Roof Top tent.
Even great for turning your existing trailer into a Camper trailer
Product Features
- Proudly made in Australia
- Made with Australian Steel
- All components are zinc primed then powder coated in a texture black
- Full adjustable height and width to suit most Australian Utes
- Mounts to the top of most tubs
- Many options available, and more being added all the time
- Great for mounting side or extra reverse lights
- Great for putting LED strip lights in to illuminate your tub area.
Tyre carrier option
- Can mount tyre above rack, or below rack for lower height and still run a roof top tent
- Can suit up to a 37" tyre
- Tyre location can be off set forward back or left and right to suit other accessories
Storage Box option
- Designed to suit Pelican space case made by Trimcast in Australia Front Opening Range BG055036045BP (must run at max height for this box)
- Box includes removable front face
- Box includes 2 shelves
- Rack can accommodate 2 of these boxes side by side on each side, so a total of 4 if required.
- Storage box mounts to rack with 2 ratchet straps (not supplied)
Tool attachments
- Optional lockable High lift jack holder (comes with extra long span cross member when used with 48" Jack)
- Optional lockable shovel holder (may require extra long span cross member depending on where you fit it)
- Optional lockable Axe holder (may require extra long span cross member depending on where you fit it)
- Works with Quick Fists in most areas
- Optional Roller shutter brackets
- Adapter brackets to suit Mountain Top brand Roller shutters.
Jerry Can mounts
- Mount a Jerry can on it's side with just 2 ratchet straps (not supplied) and our support bracket
More mounts coming soon
Fixed shipping price is for Australian metro addresses, more applies for country and international orders. Please contact us for a freight quote info@uneek4x4.com.au 1300 80 69 52
Fitting time: 2-3 hours depending on accessories. Requires drilling into the tub if roller shutter is not used
Tray & trundle - Steel tray for Dual Cabs With draw and rear ladder rack
Draw: 1680 Long x 875 Wide x 120 Depth
OZY Steel Ute Tray Standard Features (fully white powder coated):
- Heavy duty high tensile steel deck
- 250 mm high sides
- Chequer plate floor with 4 lashing rings
- Laser cut safety mesh
- Tail light protectors
- Heavy duty hinges
- Heavy duty self-adjusting latches
- Heavy duty mounting system
- 76 mm dia headboard tube with pins
- Load holding pins
- Continuous 32 mm tie down rope rails
- Mudguards and flaps
Tray & trundle - Steel tray for Extra Cabs With draw and rear ladder rack
Draw: 1980 Long x 875 Wide x 120 Depth
OZY Steel Ute Tray Standard Features (fully white powder coated):
- Heavy duty high tensile steel deck
- 250 mm high sides
- Chequer plate floor with 4 lashing rings
- Laser cut safety mesh
- Tail light protectors
- Heavy duty hinges
- Heavy duty self-adjusting latches
- Heavy duty mounting system
- 76 mm dia headboard tube with pins
- Load holding pins
- Continuous 32 mm tie down rope rails
- Mudguards and flaps
OZY steel ute tray is designed using advance computer modelling and field tested extensively to withstand harsh Australian conditions. This heavy duty steel tray is fully white powder coated. OZY steel tray comes in three different sizes to suit practically all makes and models of utes available in Australia.
OZY Steel Ute tray includes so many standard inclusions like trundle draw, rear ladder rack and lashing ring etc which other brands charge as optional extras. We believe our ute tray beats the competition by a country mile in terms of quality, durability, usability and price. OZY steel tray is made from high tensile folded steel for strength and light weight. We use pre galvanised steel in manufacture of our steel tray to prevent rusting even if the top powder coating is scratched.
Modular welded construction of our steel tray makes it maintenance, repair and DIY friendly. Our steel tray can be shipped as flat pack and any DIY person can be able to assemble it in less than an hour. Just start comparing OZY steel ute tray features, you soon realise that there is no other similar product in the market to compare.
Tray & trundle - Steel tray for Single Cabs with draw and rear ladder rack
Draw: 1980 Long x 875 Wide x 120 Depth
OZY Steel Ute Tray Standard Features (fully white powder coated):
- Heavy duty high tensile steel deck
- 250 mm high sides
- Chequer plate floor with 4 lashing rings
- Laser cut safety mesh
- Tail light protectors
- Heavy duty hinges
- Heavy duty self-adjusting latches
- Heavy duty mounting system
- 76 mm dia headboard tube with pins
- Load holding pins
- Continuous 32 mm tie down rope rails
- Mudguards and flaps
OZY steel ute tray is designed using advance computer modelling and field tested extensively to withstand harsh Australian conditions. This heavy duty steel tray is fully white powder coated. OZY steel tray comes in three different sizes to suit practically all makes and models of utes available in Australia.
OZY Steel Ute tray includes so many standard inclusions like trundle draw, rear ladder rack and lashing ring etc which other brands charge as optional extras. We believe our ute tray beats the competition by a country mile in terms of quality, durability, usability and price. OZY steel tray is made from high tensile folded steel for strength and light weight. We use pre galvanised steel in manufacture of our steel tray to prevent rusting even if the top powder coating is scratched.
Modular welded construction of our steel tray makes it maintenance, repair and DIY friendly. Our steel tray can be shipped as flat pack and any DIY person can be able to assemble it in less than an hour. Just start comparing OZY steel ute tray features, you soon realise that there is no other similar product in the market to compare.
Standard Aluminium Tray for Dual Cabs
Our Standard range of aluminium ute trays have been designed for the customer that is looking for a high quality, feature packed, heavy duty tray for a reasonable price. This tray is ideal for the tradie looking for a quality tray for his/her work ute, the traveller wanting explore Australia or someone just looking to enhance the usability of their ute.
This heavy duty aluminium tray comes in three different sizes to suit practically all makes and models of utes available in Australia.
Our Standard aluminium ute tray includes so many standard inclusions like a 76mm headboard with fully welded expanded mesh to protect your back window, 250mm dropsides and tailgate, tail light protectors, as well as heavy duty runners and steel mounts.
Our Standard aluminium tray can be shipped as flat pack if required, with any competent DIY person being able to assemble it in around 90mins.
Standard Aluminium Ute Tray Features Include:
- Heavy duty aluminium tray deck
- 250 mm high sides
- Fully welded aluminium headboard mesh
- 76 mm diameter aluminium headboard tube with ladder pins
- Removable rear rack (optional extra)
- Tail light protectors
- Heavy duty roller draw with 3 point locking system (optional extra)
- Heavy duty aluminium hinges
- Heavy duty self-adjusting latches
- Heavy duty mounting system
- Continuous 34 mm tie down rope rails
- Aluminium mudguards with mudflaps